public class UHFCSYX_A4NetWork extends RFIDWithUHFA4NetWork_qcom
UhfBase.ErrorCodeBank_EPC, Bank_RESERVED, Bank_TID, Bank_USER, LockBank_ACCESS, LockBank_EPC, LockBank_KILL, LockBank_TID, LockBank_USER, LockMode_LOCK, LockMode_OPEN, LockMode_PLOCK, LockMode_POPEN, UPDATE_UHF| Constructor and Description |
|---|
UHFCSYX_A4NetWork() |
| Modifier and Type | Method and Description |
|---|---|
boolean |
blockWriteData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
向标签写入数据(支持大数据标签写入)、当需要写入的标签数据比较大可以使用此函数写入
Write data into tag(support big-sized data writing), user could use this function when big-sized data need to be written. |
boolean |
closeWifi() |
boolean |
disableBeep() |
boolean |
enableBeep() |
boolean |
eraseData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
擦除数据，被擦除的数据块其内容将被设置成0.
Data block that has been cleaned will be setup to 0. |
boolean |
eraseData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
擦除指定标签的数据，被擦除的数据块其内容将被设置成0.
Clean specific tag data, data block after cleaned will be set to 0. |
java.lang.String |
generateLockCode(java.util.ArrayList<java.lang.Integer> lockBank,
int lockMode)
获取锁定码
Get lock code |
java.lang.String |
getAndroidDeviceHardwareVersion() |
java.util.List<AntennaState> |
getANT()
获取当前设置的天线
|
java.util.List<AntennaPowerEntity> |
getAntennaPower() |
int |
getAntennaPower(AntennaEnum ant)
获取单个天线的功率
|
char[] |
getBeep()
获取蜂鸣器状态
|
ConnectionStatus |
getConnectStatus()
获取UHF连接状态
Acquire UHF connection status |
int |
getCW()
获取连续波设置
Acquire CW setup |
InventoryModeEntity |
getEPCAndTIDUserMode()
设置EPC 和 TID模式
|
java.lang.String |
getEthernetIpConfig()
获取以太网配置状态，json格式
|
java.lang.String |
getEthernetMac() |
int |
getFrequencyMode()
读取模块的工作模式
Read work mode of module |
Gen2Entity |
getGen2()
获取Gen2参数
Acquire Gen2 parameter [0] target: s0:0 s1:1 s2:2 s3:3 SL:4 [1] action: 0,1,2,3,4,5,6 [2] t: Disable truncation 0, Enable truncation 1 [3] q: 固定Q算法 0, 动态Q算法 1 [3] q: fixed Q algorithm 0, dynamic Q algorithm 1 [4] startQ: 0,1,2,3.....15 注意：在固定Q算法下，Q固定为StartQ，忽略MinQ 和 MaxQ [4] startQ: 0,1,2,3.....15 note: in fixed algorithm, Q is fixed as StartQ, neglect MinQ and MaxQ [5] minQ: 0,1,2,3.....15 [6] maxQ:0,1,2,3......15 [7] dr:0,1 [8] coding:0,1,2,3 [9] p:0,1 [10] sel:0,1,2,3 [11] Session:0,1,2,3 [12] g:0,1 [13] linkFrequency:0,1,2,3,4,5,6,7 |
int |
getPower()
读取模块的功率
Read module output power |
int |
getProtocol()
获取协议
Acquire protocol |
ReaderIPEntity |
getReaderCurrentIp() |
int |
getRFLink()
获取链路参数
acquire link parameter |
java.lang.String |
getTcpServiceVersion()
获取tcp服务版本
|
int |
getTemperature()
获取模块温度
Acquire module Temperature |
java.lang.String |
getVersion()
获取uhf版本号
read module type |
java.lang.String |
getWifiInfo()
获取wifi热点信息(json格式)
|
java.lang.String |
getWifiIpConfig()
获取wifi配置状态，json格式
|
UHFTAGInfo |
inventorySingleTag()
单步识别标签
Identify tag in single mode |
UHFCSYX.TagAuthenticationResponseInfo |
inventorySingleTagResponseInfo() |
boolean |
isEnableBeep()
盘点标签蜂鸣器是否被禁用
|
boolean |
isInventorying()
uhf 是否正在盘点
|
boolean |
killTag(java.lang.String killPwd)
销毁指定标签,默认密码(0x00 0x00 0x00 0x00)不能执行销毁
Kill specific tag, default password(0x00 0x00 0x00 0x00) |
boolean |
killTag(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData)
销毁指定标签 ,默认密码(0x00 0x00 0x00 0x00)不能执行销毁
Kill specific tag, default password(0x00 0x00 0x00 0x00) |
boolean |
lockMem(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String filterData,
java.lang.String lockCode)
锁定指定标签
Lock specific tag |
boolean |
lockMem(java.lang.String accessPwd,
java.lang.String lockCode)
锁定指定标签
Lock specific tag |
boolean |
openWifi() |
UHFCSYX.TagAuthenticationResponseInfo |
readAuthenticationTagFromBuffer(UHFTAGInfo uhftagInfo) |
java.lang.String |
readData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
读取标签数据
Read tag data |
java.lang.String |
readData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
读取指定标签数据
Read specific tag data |
UHFTAGInfo |
readTagFromBuffer()
获取缓冲区的标签数据
Get tag data from buffer startInventoryTag()启动识别标签之后，在子线程循环调用此函数不断获取缓冲区的标签信息，每次返回一张标签数据startInventoryTag() After tag reading has been enabled, call
this function in sub threads to get data information continously, return
one tag information for each time.在调用 stopInventory()之后，应当退出子线程。After call stopInventory(), exit sub threads.备注:可以直接通过设置回调接口来获取盘点数据 setInventoryCallback() |
void |
readyUpgradeTcpService()
tcp服务升级第一步,准备升级tcp服务
|
boolean |
rebootDevice()
重启android设备
|
boolean |
setANT(java.util.List<AntennaState> antStatus)
设置天线
|
boolean |
setAntennaPower(AntennaEnum ant,
int power)
设置单个天线的功率
|
boolean |
setBeep(int mode)
设置蜂鸣器，盘点读到标签鸣叫
|
void |
setBuzzerOff() |
void |
setBuzzerOffOfAndroid() |
void |
setBuzzerOn(int time)
单位:毫秒,time:100-65535
|
void |
setBuzzerOnOfAndroid(int time)
设置蜂鸣器立即鸣叫,与盘点无关
单位:毫秒,time:100-65535
|
void |
setConnectionStatusCallback(ConnectionStatusCallback<java.lang.Object> btStatusCallback)
设置UHF连接状态回调
Setup UHF continuous stauts call-back |
boolean |
setCW(int flag)
设置连续波
Setup CW |
boolean |
setEPCAndTIDMode()
设置循环盘点同时读取 EPC、TID 模式
Setup auto scan to acquire EPC, TID mode |
boolean |
setEPCAndTIDUserMode(int user_prt,
int user_len)
设置循环盘点同时读取 EPC、TID、USER 模式
Setup auto scan to acquire EPC, TID, User mode |
boolean |
setEPCMode()
设置循环盘点只获取EPC的数据
Setup auto scan to acquire EPC only |
boolean |
setEthernetConfigInfo(ReaderIPEntity ipconfig)
设置以太网静态ip
|
boolean |
setEthernetIpDynamicAssign() |
boolean |
setFastID(boolean enalbe)
开关FastID功能
ON/OFF FastID function |
boolean |
setFilter(int bank,
int ptr,
int cnt,
java.lang.String data)
过滤循环盘点的标签，在
startInventoryTag()循环盘点标签之前，可以设置要过滤的数据。Filter tag in auto scan mode, before scanning tags startInventoryTag(), setup data that needs to be filtered.设置过滤条件之后，盘点标签时将符合过滤条件的标签上传到缓存区 setInventoryCallback() 。After setup, upload filtered tags to buffer setInventoryCallback() . |
boolean |
setFreHop(float fre)
设置模块频点
Setup frequency Hop |
boolean |
setFrequencyMode(int freMode)
设置模块的工作模式
Setup work mode of module |
boolean |
setGen2(Gen2Entity entity)
设置 Gen2参数
Setup Gen2 parameter 0,1,2,3,4,5,6,7 |
void |
setGPIStateCallback(IGPIStateCallback uhfGPIOStateCallback)
设置GPIO input状态改变的回调接口
|
void |
setInventoryCallback(IUHFInventoryCallback inventoryCallback)
设置盘点回调接口，接收循环盘点到的标签数据
Set the inventory callback interface to receive the label data from the cyclic inventory 备注：需要在开始循环盘点 IUHF.startInventoryTag()之前调用此方法。Note: This method needs to be called before starting the loop inventory IUHF.startInventoryTag(). |
void |
setInventoryCallback(UHFCSYX.IUHFInventoryCallback inventoryCallback) |
boolean |
setInventoryMessageMode() |
void |
setIPAndPort(java.lang.String host,
int port) |
boolean |
setPower(int power)
设置所有天线的功率
Setup output power |
boolean |
setProtocol(int protocol)
设置协议
Setup protocol |
boolean |
setRFLink(int mode)
设置链路参数
Setup RFlink |
boolean |
setTagFocus(boolean enalbe)
开关TagFocus功能
ON/OFF TagFocus |
boolean |
setTcpServicePort(int port)
设置TCP端口
|
void |
setUpgradeProgress(IUpgradeProgress iUpgradeProgress)
TCP服务升级的进度条
|
boolean |
setUpgradeTcpServiceData(byte[] data)
tcp服务升级第二步,填充升级数据
|
boolean |
setWifiConfigInfo(WifiConfig wificonfig)
设置wifi配置
|
boolean |
startInventoryTag()
启动识别Tag循环，只是开启识别Tag循环，之后将识别到的标签号上传到缓冲区，
setInventoryCallback() Enable Tag auto reading and upload tag number to buffer, setInventoryCallback() 开启循环识别之后，模块只能响应 stopInventory()函数 。after switch on auto reading, module will give feedback to stopInventory() only. |
boolean |
startUpgradeTcpService()
tcp服务升级第三步,开始发送数据到服务器
|
boolean |
stopInventory()
停止循环识别，在调用此函数之后应当退出循环获取缓冲区的标签信息的子线程
Stop auto reading, after call this function to exit sub threads of tag data of buffer. |
boolean |
uhfBlockPermalock(java.lang.String accessPwd,
int FilterBank,
int FilterStartaddr,
int FilterLen,
java.lang.String FilterData,
int ReadLock,
int uBank,
int uPtr,
int uRange,
byte[] uMaskbuf)
数据块操作
|
boolean |
uhfJump2Boot()
uhf固件升级第一步,uhf进入boot模式
|
boolean |
uhfJump2Boot(int type)
uhf进入boot模式 ，开始升级之前需要调用此函数
UHF enter boot mode, need to call this formula before upgrade |
boolean |
uhfStartUpdate()
uhf固件升级第二步,uhf开始升级
|
boolean |
uhfStopUpdate()
uhf固件升级第四步,uhf升级结束
|
boolean |
uhfUpdating(byte[] buff)
uhf固件升级第三步,发送uhf升级数据。 每次固定64个字节
|
boolean |
writeData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String data)
向标签写入数据
Write data in tag |
boolean |
writeData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
将数据写入指定标签
Write data |
boolean |
writeDataToEpc(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
java.lang.String writeData)
将数据写入到EPC,而且自动适配盘点的EPC长度
Write data to epc |
boolean |
writeDataToEpc(java.lang.String accessPwd,
java.lang.String writeData)
将数据写入到EPC,而且自动适配盘点的EPC长度
Write data to epc |
free, init, inputStatus, output1Off, output1On, output2Off, output2On, output3Off, output3On, output4Off, output4On, outputOnAndOff, outputWgData0Off, outputWgData0On, outputWgData1Off, outputWgData1On, setGPIStateReversefactoryReset, getFastInventoryMode, readTcpServiceState, setEPCAndTIDUserMode, setFastInventoryMode, setOnLowBatteryListenerequals, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitgetEthernetMac, setIPAndPortgetANT, getAntennaPower, getAntennaPower, setANT, setAntennaPowercloseWifi, disableBeep, enableBeep, getAndroidDeviceHardwareVersion, getEthernetIpConfig, getReaderCurrentIp, getTcpServiceVersion, getWifiInfo, getWifiIpConfig, isEnableBeep, openWifi, readyUpgradeTcpService, rebootDevice, setBuzzerOff, setBuzzerOn, setEthernetConfigInfo, setEthernetIpDynamicAssign, setGPIStateCallback, setTcpServicePort, setUpgradeProgress, setUpgradeTcpServiceData, setWifiConfigInfo, startUpgradeTcpServiceblockWriteData, eraseData, eraseData, factoryReset, generateLockCode, getConnectStatus, getCW, getEPCAndTIDUserMode, getFastInventoryMode, getFrequencyMode, getGen2, getProtocol, getRFLink, getTemperature, getVersion, inventorySingleTag, isInventorying, killTag, killTag, lockMem, lockMem, readData, readData, readTagFromBuffer, setConnectionStatusCallback, setCW, setEPCAndTIDMode, setEPCAndTIDUserMode, setEPCAndTIDUserMode, setEPCMode, setFastID, setFastInventoryMode, setFilter, setFreHop, setFrequencyMode, setGen2, setProtocol, setRFLink, setTagFocus, uhfBlockPermalock, uhfJump2Boot, uhfJump2Boot, uhfStartUpdate, uhfStopUpdate, uhfUpdating, writeData, writeData, writeDataToEpc, writeDataToEpcpublic boolean setInventoryMessageMode()
public void setInventoryCallback(UHFCSYX.IUHFInventoryCallback inventoryCallback)
public void setInventoryCallback(IUHFInventoryCallback inventoryCallback)
IUHFIUHF.startInventoryTag()之前调用此方法。IUHF.startInventoryTag().setInventoryCallback in interface IUHFsetInventoryCallback in interface IUHFURAxExtendinventoryCallback - 盘点回调接口(inventory callback interface)public UHFCSYX.TagAuthenticationResponseInfo inventorySingleTagResponseInfo()
public boolean startInventoryTag()
setInventoryCallback() setInventoryCallback() stopInventory()函数 。stopInventory() only. stopInventory() 停止识别循环(Stop auto reading)setInventoryCallback() 获取冲区的数据(get data from buffer)startInventoryTag in interface IUHFpublic boolean stopInventory()
stopInventory in interface IUHFpublic UHFCSYX.TagAuthenticationResponseInfo readAuthenticationTagFromBuffer(UHFTAGInfo uhftagInfo)
public void setIPAndPort(java.lang.String host,
int port)
public void setConnectionStatusCallback(ConnectionStatusCallback<java.lang.Object> btStatusCallback)
IUHFsetConnectionStatusCallback in interface IUHFbtStatusCallback - 回调接口(Callback interface)public void setUpgradeProgress(IUpgradeProgress iUpgradeProgress)
setUpgradeProgress in interface IUHFURAxExtendpublic void setGPIStateCallback(IGPIStateCallback uhfGPIOStateCallback)
setGPIStateCallback in interface IUHFURAxExtendpublic void setBuzzerOnOfAndroid(int time)
public java.lang.String getTcpServiceVersion()
getTcpServiceVersion in interface IUHFURAxExtendpublic boolean setEthernetConfigInfo(ReaderIPEntity ipconfig)
setEthernetConfigInfo in interface IUHFURAxExtendpublic boolean setWifiConfigInfo(WifiConfig wificonfig)
setWifiConfigInfo in interface IUHFURAxExtendpublic boolean setTcpServicePort(int port)
setTcpServicePort in interface IUHFURAxExtendpublic java.lang.String getWifiInfo()
getWifiInfo in interface IUHFURAxExtendpublic void readyUpgradeTcpService()
readyUpgradeTcpService in interface IUHFURAxExtendpublic boolean setUpgradeTcpServiceData(byte[] data)
setUpgradeTcpServiceData in interface IUHFURAxExtendpublic boolean startUpgradeTcpService()
startUpgradeTcpService in interface IUHFURAxExtendpublic boolean uhfJump2Boot()
uhfJump2Boot in interface IUHFpublic boolean uhfJump2Boot(int type)
IUHFuhfJump2Boot in interface IUHFtype - 0,upgrade reader mainboard
1,upgrade UHF module
2,upgrade reader bootloader
3,upgrade Ex10 SDK firmwarepublic boolean uhfStartUpdate()
uhfStartUpdate in interface IUHFpublic boolean uhfUpdating(byte[] buff)
uhfUpdating in interface IUHFbuff - 固件数据(buff firmware data)public boolean uhfStopUpdate()
uhfStopUpdate in interface IUHFpublic ConnectionStatus getConnectStatus()
IUHFgetConnectStatus in interface IUHFgetConnectStatus in class UhfBasepublic java.lang.String getVersion()
getVersion in interface IUHFpublic int getPower()
public boolean setPower(int power)
power - 功率值(Power values)public java.lang.String getEthernetMac()
public int getFrequencyMode()
getFrequencyMode in interface IUHFpublic boolean setFrequencyMode(int freMode)
IUHFsetFrequencyMode in interface IUHFfreMode - 0x01：China Standard(840~845MHz) public UHFTAGInfo readTagFromBuffer()
startInventoryTag()启动识别标签之后，在子线程循环调用此函数不断获取缓冲区的标签信息，每次返回一张标签数据startInventoryTag() After tag reading has been enabled, call
this function in sub threads to get data information continously, return
one tag information for each time.stopInventory()之后，应当退出子线程。stopInventory(), exit sub threads.setInventoryCallback() readTagFromBuffer in interface IUHFpublic java.lang.String generateLockCode(java.util.ArrayList<java.lang.Integer> lockBank,
int lockMode)
generateLockCode in interface IUHFlockBank - 要锁定的区域 (lockBank areas that need to lock ): IUHF.LockBank_KILLIUHF.LockBank_ACCESSIUHF.LockBank_TIDIUHF.LockBank_USERIUHF.LockBank_EPClockMode - 锁定的模式(lockMode lock modes):IUHF.LockMode_LOCKIUHF.LockMode_OPENIUHF.LockMode_PLOCKIUHF.LockMode_POPENpublic boolean lockMem(java.lang.String accessPwd,
java.lang.String lockCode)
public boolean lockMem(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String filterData,
java.lang.String lockCode)
lockMem in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 标签的存储区(memory area):IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、
IUHF.Bank_USERptr - 过滤起始地址,单位:bit (Filter start address,unit:bit)cnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤。 (Filter data
length(unit:bit) when filter length is 0, it means no filter.)filterData - 过滤数据(Filter data)lockCode - 锁定码 (Lock Code)public UHFTAGInfo inventorySingleTag()
inventorySingleTag in interface IUHFpublic java.lang.String readData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
readData in interface IUHFaccessPwd - Access passwordbank - 读取的存储区(read storage area): IUHF.Bank_RESERVED、
IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 读取的起始地址(单位:字) (read start address(unit: word))cnt - 读取的数据长度(单位:字) (read data length(unit: word))public java.lang.String readData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
readData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)filterData - 过滤的数据(Filtered data)bank - 读取的存储区(Read storage area) IUHF.Bank_RESERVED、
IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 读取的起始地址(单位:字) (read start address(unit: word))cnt - 读取的数据长度(单位:字) (read data length(unit: word))public boolean writeData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String data)
writeData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 标签的存储区(Storage area):IUHF.Bank_RESERVED、IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))data - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean writeData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
writeData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)filterData - 过滤的数据(Filtered data)bank - 标签的存储区(Storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC
、IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean blockWriteData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
blockWriteData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)filterData - 过滤的数据(Filtered data)bank - 标签的存储区(Storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC
、IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean eraseData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
eraseData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)filterData - 过滤的数据(Filtered data)bank - 擦除的数据区域(Cleaned data block):IUHF.Bank_RESERVED、
IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 擦除的起始地址(单位:字) (Cleaned start address(Unit: word))cnt - 擦除的数据长度(单位:字) (Cleaned data length(Unit: word))public boolean eraseData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
eraseData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 擦除的数据区域(Cleaned data block):IUHF.Bank_RESERVED、
IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 擦除的起始地址(单位:字) (Cleaned start address(Unit: word))cnt - 擦除的数据长度(单位:字) (Cleaned data length(Unit: word))public boolean setFilter(int bank,
int ptr,
int cnt,
java.lang.String data)
startInventoryTag()循环盘点标签之前，可以设置要过滤的数据。startInventoryTag(), setup data that needs to be filtered.setInventoryCallback() 。setInventoryCallback() .setFilter in interface IUHFbank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERptr - 过滤的起始地址(Filter start address)cnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)data - 过滤的数据(Filtered data)public boolean killTag(java.lang.String killPwd)
public boolean killTag(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData)
killTag in interface IUHFaccessPwd - 销毁密码(Kill password)filterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)filterData - 过滤的数据(Filtered data)public boolean setProtocol(int protocol)
setProtocol in interface IUHFprotocol - 0x00： ISO18000-6C public int getProtocol()
getProtocol in interface IUHFpublic boolean setFreHop(float fre)
public boolean setRFLink(int mode)
setRFLink in interface IUHFmode - 0-PR ASK/Miller8/160KHz public int getRFLink()
public boolean setFastID(boolean enalbe)
public boolean setTagFocus(boolean enalbe)
setTagFocus in interface IUHFenalbe - true：开(on)，false：关(off)public boolean setEPCMode()
setEPCMode in interface IUHFpublic boolean setEPCAndTIDMode()
setEPCAndTIDMode in interface IUHFpublic boolean setEPCAndTIDUserMode(int user_prt,
int user_len)
setEPCAndTIDUserMode in interface IUHFuser_prt - USER区起始地址(Start addressin USER area)user_len - USER区长度(Data length in USER area)public int getTemperature()
getTemperature in interface IUHFpublic boolean uhfBlockPermalock(java.lang.String accessPwd,
int FilterBank,
int FilterStartaddr,
int FilterLen,
java.lang.String FilterData,
int ReadLock,
int uBank,
int uPtr,
int uRange,
byte[] uMaskbuf)
uhfBlockPermalock in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)FilterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、
IUHF.Bank_TID、IUHF.Bank_USERFilterStartaddr - 过滤的起始地址(Filter start address)FilterLen - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data
length(unit:bit), when filter data length is 0, it means no
filter.)FilterData - 过滤的数据(Filtered data)ReadLock - : 0表示读设置 1表示锁设置 (0 menas read config 1 means lock config)uBank - : 存储区域(Storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC
、IUHF.Bank_TID、IUHF.Bank_USERuPtr - : 存储区域起始地址 ，默认为0，其中 1个块单元为16个块 (Start address in storage area,
default is 0, 1 unit has 16 blocks)uRange - : 存储区域结束范围，默认为1，其中 1个块单元为16个块 (End of storage, default is 1, 1
unit has 16 blocks)uMaskbuf - : 设置锁MSAK， 高位在前，每个bit 代表为1个块，默认为2字节 (Setup lock MSAK, high
level is at front, every bit has 1 block, default is 2 bytes.)public boolean setGen2(Gen2Entity entity)
public Gen2Entity getGen2()
public int getCW()
public boolean setCW(int flag)
public InventoryModeEntity getEPCAndTIDUserMode()
getEPCAndTIDUserMode in interface IUHFpublic boolean disableBeep()
disableBeep in interface IUHFURAxExtendpublic boolean enableBeep()
enableBeep in interface IUHFURAxExtendpublic void setBuzzerOff()
setBuzzerOff in interface IUHFURAxExtendpublic void setBuzzerOn(int time)
IUHFURAxExtendsetBuzzerOn in interface IUHFURAxExtendpublic boolean openWifi()
openWifi in interface IUHFURAxExtendpublic boolean closeWifi()
closeWifi in interface IUHFURAxExtendpublic boolean setBeep(int mode)
mode - 0:on , 1:offpublic char[] getBeep()
public java.lang.String getAndroidDeviceHardwareVersion()
getAndroidDeviceHardwareVersion in interface IUHFURAxExtendpublic java.lang.String getEthernetIpConfig()
getEthernetIpConfig in interface IUHFURAxExtendpublic java.lang.String getWifiIpConfig()
getWifiIpConfig in interface IUHFURAxExtendpublic boolean rebootDevice()
rebootDevice in interface IUHFURAxExtendpublic void setBuzzerOffOfAndroid()
public boolean setEthernetIpDynamicAssign()
setEthernetIpDynamicAssign in interface IUHFURAxExtendpublic ReaderIPEntity getReaderCurrentIp()
getReaderCurrentIp in interface IUHFURAxExtendpublic boolean isEnableBeep()
isEnableBeep in interface IUHFURAxExtendpublic boolean writeDataToEpc(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
java.lang.String writeData)
IUHFwriteDataToEpc in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean writeDataToEpc(java.lang.String accessPwd,
java.lang.String writeData)
IUHFwriteDataToEpc in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean isInventorying()
IUHFisInventorying in interface IUHFisInventorying in class UhfBasepublic java.util.List<AntennaState> getANT()
IMultipleAntennagetANT in interface IMultipleAntennapublic boolean setANT(java.util.List<AntennaState> antStatus)
IMultipleAntennasetANT in interface IMultipleAntennaantStatus - 天线号public boolean setAntennaPower(AntennaEnum ant, int power)
IMultipleAntennasetAntennaPower in interface IMultipleAntennaant - 天线号power - 功率public int getAntennaPower(AntennaEnum ant)
IMultipleAntennagetAntennaPower in interface IMultipleAntennapublic java.util.List<AntennaPowerEntity> getAntennaPower()
getAntennaPower in interface IMultipleAntenna